Getting the Right Ball in Your Hand

When you walk into your pro shop and see the overwhelming options of bowling balls hanging on the wall, have you ever asked yourself why there so many to choose from?

There are three types of bowling balls used in today’s game: plastic, urethane and reactive.

Let’s go through each one and talk about how adding them to your arsenal will improve your game.

Plastic

A lot of bowlers think the first generation of bowling balls released to the market were plastic, but actually, the first bowling balls produced were made of rubber.

Plastic then became the primary surface for bowling balls, but the game was much simpler when bowlers used this for their strike shot.

Wood was the only lane surface, and the oil pattern laid out didn’t have a fraction of the volume of today’s games.

So that must mean there is no use for a plastic ball any more, right? Wrong.

If you want to fill frames, it’s imperative to throw at spares with a plastic ball. It cuts down angles to the pins and doesn’t have the reaction or down-lane hook the other bowling balls have.

Urethane

The next bowling ball, which was all the rage in the 90’s, was made out of urethane. It was really the beginning of the modern game changing how we played the sport.

Once again, the sport evolved adding more volume and changing the length of the patterns, but that doesn’t mean this ball is obsolete.

In recent years, manufactures have introduced a new line of urethane bowling balls because bowlers found a place for them in today’s modern game.

Bowlers turn to the urethane ball on short patternsand extremely dry conditions. Having a urethane ball in your arsenal for league night is a great way to get back to where you’re comfortable after nine other bowlers have helped rip apart the pattern.

Reactive

Now for the heavy hitter the reactive ball. It’s going to hook. This ball revolutionized the sport and the way it is played because it opened up parts of the lane that have never been played before.

For example, when watching the pros on tv, have you ever seen someone loft the gutter cap (sliding as far left as you can while airing the bowling ball out left of the center arrow) before these bowling balls were made? Simple answer: never.

Now that you know a little more about the different kinds of bowling balls and when to use them, you need to learn how to fine tune your equipment to get maximum performance.

Very rarely does a professional use a bowling ball out of the box without adjusting its surface to the lane condition they are competing on.

The reason they do this is to achieve what’s called “matching up”. When you are matched up, your strike percentage increases and your scores do too.

Getting the right ball in your hand, with the right surface, is vital to improving your scores in today’s game. Go out and give it a shot, you’ll like what you see.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

19 Responses to “Getting the Right Ball in Your Hand”

  1. duane fenton

    I throw a slow delivery standup on last dot left with a slow ball (9 to 10 miles per hour. What type of bowling serface should I be conserrding

  2. Dale Deible

    is the rubber bowling ball available

  3. Dale Deible

    Emprove average

  4. Ateeq UrRehman

    which one is best among all these

  5. David Hill

    I can hook a ball but don't spin a lot what's the best ball to have

  6. Freddie

    I have returned to bowling after 25 years but do not have a ball. Which is better suited for me? I once used a rubber Earl Anthony ball to hook slightly. Advise me please.

  7. Buddy Hart

    I’m 77 years of age due to health and age I have lost ball speed. I now bowl with Hammer widow spare ball to keep ball in play. I want to throw reactive for better carry. Can you help me

  8. Rodney Hankins

    I bowling on lanes 7 and 8 at Funfest in Brooklyn NY the house shot I play on is you have to roll the ball on the second arrow the lanes dry up from 1 to 8 and since my bowling speed is around 14 to 16 I was going to used my hammer vide , my back widow urethane and my hammer Rodman p. to used what do you think?

  9. Colin S Kyle

    Very good article

  10. Shaun Renard

    Then how should a person go about choosing which reactive ball to use? I am struggling with this devils right now. I average around 190 with equipment that is 10 years old. I through a 15 lb ball usually around 16.5 mph with a rev rate that is slightly higher than average but not sure on the exact number. I typically exceed the balls ability as far as back end reaction